Levoite Pro Cabinet Hardware Jig for Handles and Knobs Aluminum Alloy Drill Guide Sleeve Drawer Pull Wood Drilling Dowelling Tools Set Drawer Knob Pull Drilling Templates Jig Tool.

We used the phrase, “measure twice,” earlier in this section, but when we’re using a cabinet hardware jig, you only have to measure once, and the result is just as accurate. We want a tool that gets the job done more quickly so we can crack open a cold one and admire our handiwork.

With the adjustable guides on a cabinet jig, once we’ve measured for one cabinet door, we can use the jig as a template for all of the other cabinets.

No need to measure and do the math for every door. A tool that eliminates the need for math? Yes, please.

When we renovate our kitchen, we want all the knobs on our drawers to be perfectly centered and our cabinet handles to be in the same location on each door.

With a cabinet hardware jig, we take the measurements once with the jig, then use the jig as the template for all the rest of the mounting holes. It makes the project go much more quickly.

Levoite Pro is ideal for installing kitchen drawers, cabinets, cupboards, door handles and drawer fronts, hinge, or Shelf.Which is specifically designed to make hole alignment and handle installation a breeze!

Accuracy

A cabinet hardware jig is exceptional when it comes to accuracy. It has the precision of an aircraft part. Everything is useful in any of the movable parts of the hardware jig. Each part has a great hold. Thanks to the precise measurement it gives you, you can quickly drill holes, so you don’t need to worry about drilling holes in the wrong places.

Versatility

A cabinet hardware jig can do almost everything you need it to do, for both small and tall cabinets. If you want to shelf holes and also reducing the amount of time it takes to find the hole centers, then you can use a hardware jig. All you need to do is to set it up, and then do as many drawers as you need. If you have a tall cabinet, then you can also use a hardware jig to do long runs of shelf holes. A cabinet hardware jig is everything a DIYer can ask for, as it can fit handles of up to 960 millimeters long.

Efficiency

Because of its accurate measurements, you’re able to drill holes quicker. If you need to finish a lot of work, but still save time, then a hardware jig is your best friend. Every time you need to install cabinet hardware, it’ll be very easy for you. And have we mentioned that the results are always 100% accurate?

What customers say about levoite pro?

Excellent Jig

I've been in the remodeling trade for 36 years and I found this jig very easy to set-up and use. Absolutely perfect alignment every time. Being able to flip the jig over for side by side doors really makes install fast without having to reset the jig. I used this jig on 5 piece drawer fronts with a flat panel. I had no problem with lining up the drill bit even though the jig did not sitting tightly on the flat panel. If you have basic experience using a drill then you will be fine because the bearing guide helps keep the drill bit straight. I would absolutely recommend this jig for the novice and pro alike!

Reviewed in the United States

Awesome product

This jig made the job of installing the hardware on our new cabinets a breeze and accurate. My husband was so glad I bought it for him. After they configured the jig, it only took my husband and son about two hours to install all the handles.

Reviewed in the United States

Sturdy and Easy

I put this to use immediately on a new built-in. Having done an identical set of pulls recently, I can say that it reduced my time spent to about a quarter of what it took before.

The jig is solid, easy to assemble and disassemble, and holds its settings in use. Instructions are minimal, but adequate.

The zip case keeps everything neat and protected in storage. It has slots cut into high density foam to hold the parts. Extra drill bushings and thumbscrews are included, along with hex keys and a drill bit.

This style of jig will work for any drawer front with a level top edge above the pull placement. The jig is long enough to register on one side edge only on longer drawers if drilling at or near the drawer front center. Not a problem in use - you just mark a reference point, top center in my case,

A keeper!

Reviewed in the United States

Instructions
Video

News

Levoite Cabinet Hardware Template for Handles and Knobs Installation

Recent posts